Aerith – Staff

75,00125,00 TTC - incl tax

SKU: N/A Category:


Please scroll down to access to the description and the pictures.

Weight includes packing and protection. Please see the product description for the actual weight of the prop.

Props will be shipped within 5 working days

Additional information

Weight N/A

ABS, ABS w/ Acetone Smoothing, PLA


With Materia, Without Materia


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Aerith - Staff

Staff ressembling the one from Aerith of Final Fantasy VII

The staff is designed to be made of 3 different parts that can be easily assembled and disassembled using bonding socket/cylindrical bonding made of 20 mm PVC tubes (it is also possible to make the staff of one single 20mm PVC tube)

Staff is sold in 10 parts disassembled without PVC tubes.

Designed by Ainlina and printed by Valentin (Printer Prusa Mk3S, 2 avalaible materials: PLA & ABS)

Props will be shipped within 5 working days

Link of the PVC Tube used for assembly (not included, 2 required):

Total Weight: 310 g WITHOUT PVC tubing

Assembled lenght: 165cm
Disassemblend Lenght (main parts): 65cm



PLA or ABS ?
We are currently selling our props with 3 differents materials or finishes, here is a comparison of them.
– PLA: this filament is simple to print and the most cost effective, while being strong and easy to paint. However, it cannot handle temperatures over 60°C and as such can not stay in a warm environnment for a long time.
– ABS: this filament is more expensive than PLA and requires more work to print correctly, but in exchange can withstand temperatures up to 100°C, allowing a use for harsher conditions.
– ABS with Acetone smoothing: the part in ABS is put in an acetone vapor bath, smoothing the surface and giving a mirror effect to the part. This reduces greatly the time needed to get a smooth, flash surface while making the part stronger. However, we still recommend a bit of sanding and priming before painting.

Here is a comparison picture, on the left is a PLA printed part, on the right is a part in ABS smoothed with acetone.

Our 3D prints are sold raw, you will just need to add your personal touch by painting them in harmony with the other colours on your cosplays.
Given that there is no finish, layer lines can be visible on some places of the prints. As such, we recommend you to:
– Sand the prints to reduce the layering and help the primer adhere
– Use filler and primer to fill the remaining gaps between layers and have a product ready to paint
– Paint with the colour you want.

Prints can be either glued directly on the costume, or with velcros or magnets.

WARNING: do not leave prints directly under sunlight or any kind of strong heat source (over 60°C). PLA can melt at high temperatures.

Recent Portfolios