Barbie Anneliese crown | 3D print

30,00 TTC - incl tax

Description

Please scroll down to access to the description and the pictures.
Weight includes packing and protection. Please see the product description for the actual weight of the prop.
Props will be shipped within 15 working days

Additional information

Weight 200 g
Variante

,

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Spy X Family - Yor Forger needles | 3D printed props


3D print of a princess crown for Anneliese from Barbie Princess and the Pauper
Modeled and printed by Ainlina, in PLA.

DISCLAIMER

Our 3D prints are sold raw, you will need to sand/prime them first and add your personal touch by painting them in harmony with the other colours on your cosplays.
Given that there is no finish, layer lines can be visible on some places of the prints. As such, we recommend you to:
– Sand the prints to reduce the layering and help the primer adhere
– Use filler and primer to fill the remaining gaps between layers and have a product ready to paint
– Paint with the colour you want.

WARNING: do not leave prints directly under sunlight or any kind of strong heat source (over 45°C). PLA can melt at high temperatures.

Our designs are selfmade, with any rights for the sources reserved for rights holder. This is a fanmade item, I am not in any way an officiel reseller or licensed by the relevant IP owners.

For personal use only, please do not redistribute or resell.

As we’re cosplay enthusiastics, feel free to tag us on instagram (@ainlina_shop) to show us the final result.

Don’t see the costume piece you want ? Then send us a message, we are currently taking comissions !
Their only intented use is as props for cosplay or display. They are not suitable for heavy day to day use or children.

Dimensions

Empty gallery item. Please make sure you have upload image to it or check the short code.

Warning
Our 3D prints are sold raw, you will just need to add your personal touch by painting them in harmony with the other colours on your cosplays.
Given that there is no finish, layer lines can be visible on some places of the prints. As such, we recommend you to:
– Sand the prints to reduce the layering and help the primer adhere
– Use filler and primer to fill the remaining gaps between layers and have a product ready to paint
– Paint with the colour you want.

Prints can be either glued directly on the costume, or with velcros or magnets.

WARNING: do not leave prints directly under sunlight or any kind of strong heat source (over 60°C). PLA can melt at high temperatures.