Calamity Queller | Genshin Impact RAW 3D print

75,00 TTC - incl tax

Description

Please scroll down to access to the description and the pictures.
Weight includes packing and protection. Please see the product description for the actual weight of the prop.
Props will be shipped within 15 working days

Additional information

Weight 500 g

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Calamity Queller from Genshin Impact | Raw 3D print


Printed RAW Calamity Queller from Genshin Impact.

Designed by Ainlina and printed by Valentin (Printer Prusa Mk3S and CR 10, avalaible material: PLA)

The kit comes in 18 pieces plus 18 blocks to help glueing it. You will need a PVC (or wood) pipe for the handle of 2cm diameters, and a 2 steel rods of 3mm diameters (11cm long and 28cm long) There are multiples parts to assemble so it’s easier to paint for you, we separated the blue parts from the golden parts when it was possible (as shown in the pictures)

Don’t see the piece you want? Then send us a message, we are currently taking comissions !

DISCLAIMER

Our 3D prints are sold raw, you will need to sand/prime them first and add your personal touch by painting them in harmony with the other colours on your cosplays.
Given that there is no finish, layer lines can be visible on some places of the prints. As such, we recommend you to:
– Sand the prints to reduce the layering and help the primer adhere
– Use filler and primer to fill the remaining gaps between layers and have a product ready to paint
– Paint with the colour you want.

Prints can be either glued directly on the costume, or with velcros or magnets.

WARNING: do not leave prints directly under sunlight or any kind of strong heat source (over 45°C). PLA can melt at high temperatures.

Our designs are selfmade, with any rights for the sources reserved for rights holder. This is a fanmade item, I am not in any way an officiel reseller or licensed by the relevant IP owners.

Our props and accessories are made to order by ourselves.
Their only intented use is as props for cosplay or display. They are not suitable for heavy day to day use or children.

Dimensions

Warning
Our 3D prints are sold raw, you will just need to add your personal touch by painting them in harmony with the other colours on your cosplays.
Given that there is no finish, layer lines can be visible on some places of the prints. As such, we recommend you to:
– Sand the prints to reduce the layering and help the primer adhere
– Use filler and primer to fill the remaining gaps between layers and have a product ready to paint
– Paint with the colour you want.

Prints can be either glued directly on the costume, or with velcros or magnets.

WARNING: do not leave prints directly under sunlight or any kind of strong heat source (over 60°C). PLA can melt at high temperatures.