Jinx’s Rhino | Arcane League of Legends 3D PRINTED KIT

3D printed kit for Jinx’s bazooka (Rhino) from Arcane (League of Legends Serie) and her Fracture Skin. Separated by colour, it is super easy to print, to paint and to assemble.

It is separated by colour, that means you can either print it directly in the colour you want, or you can paint them separately with very little masking job.

3D modeled and printed by Ainlina

The whole prop is 1:1 (human) size, its final size is 110cm long. The way I printed it made it weigh around 4.7kg to 5kg.

This prop can be unbuild in 3 parts for travelling: the head, the body and the rifle are screwed so don’t need to be glued. This way you can split it into 3 parts to stock it or travel with it.

Most of the parts need to be glued, it is better to use epoxy glue for this kind of props. At least you can use cyano acrylate glue, but it will be less strong than Epoxy glue.

The screwed parts don’t need to be glued down. The thread is already in the 3D model, you don’t need to buy some screws, everything is included in 3D.

You will need to build it and paint it yourself.

DISCLAIMER

Our 3D prints are sold raw, you will need to sand/prime them first and add your personal touch by painting them in harmony with the other colours on your cosplays.

Given that there is no finish, layer lines can be visible on some places of the prints. As such, we recommend you to:

– Sand the prints to reduce the layering and help the primer adhere

– Use filler and primer to fill the remaining gaps between layers and have a product ready to paint

– Paint with the colour you want.

WARNING: do not leave prints directly under sunlight or any kind of strong heat source (over 45°C). PLA can melt at high temperatures.

Our designs are selfmade, with any rights for the sources reserved for rights holder.

Our props and accessories are made to order by ourselves.

Their only intented use is as props for cosplay or display. They are not suitable for heavy day to day use or children.