3D models for Esther’s crown from Trinity Blood.

Gems are separated from the crown if you want to print them in resin or put acrylic ones.

Size is around 13cm x 13cm x 18cm

3D printed kit for the princess Zelda from Twilight Princess

Modeled by Ainlina

You can choose between 2 variations : resin or PLA. Resin print is detailed and thin, this way it’s ready to be painted and needs almost no sanding, but it’s more expensive and heavy than PLA.

For the resin version, only the gold guard is printed in resin, the other parts are printed in PLA for a lighter props.

The sword is 120cm long, and is cut by colour so you can work directly by colours before glueing everything together.

You will need a 4mm rod to maintain the sword together.

3D printed kit for the princess Zelda from Twilight Princess

Modeled by Ainlina

You can choose between 2 variations : resin or PLA. Resin print is detailed and thin, this way it’s ready to be painted and needs almost no sanding, but it’s more expensive and heavy than PLA.

For the resin version, only the gold guard is printed in resin, the other parts are printed in PLA for a lighter props.

The sword is 120cm long, and is cut by colour so you can work directly by colours before glueing everything together.

You will need a 4mm rod to maintain the sword together.

3D models for the bodysuit from Totally Spies. Perfect for your Sam, Clover, Alex or Mandy cosplays ! Inspired by the original TV shows, I suggest you to print in PLA and then heat a bit the shoulder part to make it exactly your size.

To fix it to your bodysuit, you can use velcro, magnet, or glue it directly. You could also glue some secure pins 🙂

Modeled by Ainlina

.stl format. Can be printed with regular FDM Printers

All models are tested beforehand.

File include:
– .STL files for regular FDM printer
– detailed instructions for printing and assembling

3D printed kit for the Creator Sword from Fire Emblem, for Byleth. It is also the sword used in Super Smash Bros.

Final size is around 138cm. You can choose between two version of the sword : plain one, stronger, but less accurate, or with the hole in the middle, which is more fragile, but more accurate. You can also choose to add the center gem printed in resin if you want (it appears in the reference artbooks, but you cannot see it in the games).

You will need rods of 5mm diameter to assemble the sword.

Depending on which version you print, you’ll need :

– 2 rods of 125cm long for the model without the hole

– 2 rods of 30cm long and 2 rods of 89cm long for the model with the hole.

3D models for Vivi from One Piece; from her 2nd design (Levely / Reverie arc). Arm jewels + belt (her 2 years later outfit).

3D models for Nami from One Piece. Inspired by her belt from the two years later outfit.

There are 3 versions of the Berry buckle, depending of your needs (with a buckle, without, and without the filling).

It’s the same for the fake bullets and the details, I put 2 different versions : basic ones to glue, or ones that can be sewed for the detail or just clips on a band.

3D printed kit for the Compowder from Totally Spies (Fr : le compoudrier des totally Spies). Perfect for your Sam, Clover, Alex or Mandy cosplays ! Inspired by the original TV shows, I added a logo inside and a place to put a mirror. If you want to put a mirror, it should be 7,5cm diameter. The logo, the gem and the heart are separated if you want to print it in different colours or in resin for instance. It will need a little bit of glue on the rod to hold everything together.

It is not a toy, the buttons are fake and there is no screen or electronics included. It closes and open by your own rotation.

Size is around 10cm diameter.

You can choose between 2 version :

– a raw PLA print, in blue (our regular colour), that needs to be painted and assembled, without the mirror,

– a raw PLA print, in pink with the mirror, already assembled.