Twilight Princess Armors| 3D Printed Kit

3D printed kit for the princess Zelda from Twilight Princess

Modeled by Ainlina

Size of the armors (approximately):

• Top part : Height : 12cm,  | length: 21cm | width : 18cm
• Side part : Height : 18cm,  | length: 16cm | width : 12cm

Please take note that this is one size. It should be possible to heat them a bit to shape them a bit better but not too much.

DISCLAIMER

Our 3D prints are sold raw, you will need to sand/prime them first and add your personal touch by painting them in harmony with the other colours on your cosplays.

Given that there is no finish, layer lines can be visible on some places of the prints. As such, we recommend you to:

– Sand the prints to reduce the layering and help the primer adhere

– Use filler and primer to fill the remaining gaps between layers and have a product ready to paint

– Paint with the colour you want.

Prints can be either glued directly on the costume, or with velcros or magnets.

WARNING: do not leave prints directly under sunlight or any kind of strong heat source (over 45°C). PLA can melt at high temperatures.

Our designs are selfmade, with any rights for the sources reserved for rights holder. This is a fanmade item, I am not in any way an officiel reseller or licensed by the relevant IP owners.

Our props and accessories are made to order by ourselves.

Their only intented use is as props for cosplay or display. They are not suitable for heavy day to day use or children.